Self-clinching PEM^® R'ANGLE^® fasteners provide you with strong right angle attachment points in sheets as thin as .040" / 1 mm
R'ANGLE fasteners are cost-effective replacements for:

• bent edge tabs
• bent center tabs
• bent flanges
• angle brackets
• tack welds
• loose hardware

Simply press this fastener into a properly sized rectangular mounting hole. It is held permanently in the sheet or panel using

the same high-performance, self-clinching technology that our products have employed since 1942.

Now you can securely attach another sheet or component perpendicular to the sheet in which the WANGLE fastener is installed. For Type RAA, attachment is easily made using thread forming screws resulting in a thread fit which resists vibration and has excellent torque resistance.* Type RAS fasteners are threaded and attachment is simply made using a standard screw. For either type, the holding power of the fastener is unaffected by the repeated removal and reinstallation of the screw.

PEM^®R'ANGLE fasteners provide many advantages over bent tabs and flanges, including:

• more predictable designs
• material savings
• tighter design control
• improved shielding characteristics
• redution of losse hardware
• fewer assembly steps
• unmarred panel surfaces