 |
|
These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes - and become permanently mounted in the thin sheet.
PEM® brand thru-hole threaded standoffs are installed with their heads flush with one surface of the mounting sheet. When blind-threaded types are used, outer sheet surfaces are not only flush, but closed as well. Unthreaded standoffs are also available for spacing multi-panel assemblies.
Types S04 and BSO4 standoffs are for installation into stainless steel sheets as thin as .040" / 1.02 mm.
Types TSO, TSOS, and TSOA self-clinching threaded standoffs provide permanent threads in sheets as thin as .025" / 0.63 mm.
PEM self-clinching standoffs are also available on special order in non-heat treated carbon steel as type SON (thru-hole threaded) or BSON (blind threaded).
|
